Serapeum coffins are a mystery that puzzled Earth scientists…
The Temple of Serapeum is located in the Saqqara archaeological area, and Saqqara is located in Badrashin, about 30 km away from the Giza pyramids.
There are 26 huge granite sarcophagi in the temple…
The coffin lid weighs 30 tons!!!
And the body of the coffin itself is 70 tons!!!
That is, each coffin is approximately 100 tons!!!
Why were these coffins made…?
And for whom…?
And why are all the coffins empty and closed except for one coffin…?
Why was no mummy or a carcass of the body of the Apis calf found in any of them, as was claimed by “Auguste Marit” Pasha, the discoverer of the cemetery!!!!?
Who made it and how.. and why was it made.. and why is it so huge…?
Then, in the end, how did they move it into the corridors and tunnels of the Serapeum!!!?
If the pyramids of Giza are the largest and greatest monuments, then the Serapeum is the most confusing and confusing monument in the world!!!!
The catacombs of the Serapeum are in themselves a dilemma. In the summer, you find them cold, and in the winter, they are warm. The tunnels are 400 meters long, dug in the heart of the rock of the Saqqara plateau, not in the middle of the sand, and the tunnel descends to it by a stepped ladder. The spaces shown on the map are the boxes.
And if we look at the main corridor, we find it on the same line. Could it be that this long tunnel was dug only with pickaxes?
The tunnels of the Serapeum have only one door, which is the entrance and exit, and the vision inside the tunnels, even with the sun is very dim complete darkness, so did they dug all this distance that deep in the darkness and brought out a pile of tons on the lights of the fire torches?
It is also strange that there is no trace of the positions of the torches on the walls of the tunnel and that any fire torches at that depth with the backfill and the dust would be suffocating. Can we say that the Serapeum is evidence in itself that there was electricity in ancient Egypt!! !!?
Look at the roundness and straightness of the tunnel. Can a human hand dig a tunnel with such accuracy and straightness for this distance, or can we say that this is impossible without a drilling machine?
The tunnels are not dug in the sand, but they are dug in the rocks of Saqqara, which certainly requires an incredible effort to be done by the human hand alone, but powerful and advanced machines have accomplished this work. If we look at our contemporary civilization, we will find that to dig a tunnel like this; we will need a tunnel boring machine.
Then we come to the coffins of the Serapeum themselves, which are a scientific and engineering miracle even today!!
These sarcophagi were not built but carved. Like any coffin, it has 4 sides, a base and a lid. The body of the sarcophagus itself was carved by cutting a solid block of granite of various kinds from quarries located in the south of the country, in Luxor, Aswan and Sudan.
Then, after cutting that mass, estimated at 80 tons, it is drilled and polished from the quarry, and then the cover is carved.
The coffins are all made of high-hardness rocks (red granite – black granite – basalt – quartz), which are rocks that can only be dealt with by diamond cutters!!!
It is unreasonable for anyone to say that they were carved with the tools that were used in the dynastic era, which are respectively (stones – copper – bronze – then iron in the later ages) all of which could not be dealt with at all with these tools, let alone polishing them in this way!!!
Digging the box itself is baffling; how did they do it?
There is no doubt that shovels and primitive hammering machines cannot produce such a unique engineering product; all the inner and outer corners of the box are a full 90 degrees, not 90.1 nor 89.9.
Also, the flatness coefficient with an error rate of less than 0.02%, a degree that can only be reached in the modern era by using high-precision machines or optical technology such as laser to obtain complete flatness.
The box itself is polished to the degree that makes your mind look forward, but there are advanced machines or technology that have carved and polished it in such a precise way.
Then we come to the most important question … How were these giant coffins placed inside the tunnel, which has one very narrow entrance!!!!
The amazing information is that King Farouk tried to get one of the coffins out of the tunnel and used many workers and mules, and he was unable to move it from its place except for a few meters and was left in its place. Until now!!!!